Instructions to use: You will be
adjusting the Fog Master, turn the adjustment to
low. Add water to the tank, (to set and run a
test) access the regulator; put your hand above the nozzle about 8” to 12:
inches away while the machine is running. You
will feel you hand getting wet, increase the adjustment higher until you see
drops running down your arm, this is the spot you want to keep the machine at.
You can go farther if you like. If water is running down your hand you have
opened it up to far and start over. Now empty the water and add the premixed
diluted product. Now you are set to spray the house. We recommend that you have
a long enough extension cord to go room to room.
Before beginning close all
windows, when fogging is done let stand for one to two hours then vent the
house. You can return to the house after a few hours. Make sure you have
everything opened, closets, drawers, cabinets, bookcases, pantry, and spray
into return vents, as much as possible into the ventilation system while it is
running, behind and under furniture. It does not take very long to be thorough.
But it is easier to have it all set up before you walk thru with the fogger.
Mold is present almost
everywhere, indoors and outdoors.
Mold spores are
microscopic, float along in the air, and may enter your home through windows,
doors, or AC/heating systems or even hitch a ride indoors on your clothing or a
Mold spores thrive on
moisture. Mold spores can quickly grow into colonies when exposed to water.
These colonies may produce allergens and irritants.
Mold Remediation: Sources of water leaks or moisture must be
addressed. Otherwise, the mold may return.
We recommend testing for mold
before and after using the MOLD RELIEF. Test
kits can be purchased at Home Depot, Amazon, and local hardware stores. In addition to using the MOLD RELIEF, locating
and fixing the source of water leaks and moisture must done to prevent mold
from returning. If you are not satisfied
with your results, we offer a 30-day money back guarantee. Simply send us a copy of the mold test kit
results and a refund will be issued.